home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6-1
/
Night Owl's Shareware - PDSI-006-1 - Night Owl Corp (1992).iso
/
night.doc
< prev
next >
Wrap
Text File
|
1992-01-01
|
26KB
|
640 lines
1. Introduction
Welcome to the Nightowl CDROM File Retrieval System. You have
just purchased the most up-to-date single source of Shareware, Freeware
and Public Domain software available on one CDROM. Many hours
of work have gone into making your use of the Nightowl CDROM as
enjoyable and user friendly as possible.
Your CDROM contains many thousands of files, nearly 660 megabytes to be
more precise. These files are all Shareware, Freeware or Public Domain.
With all these files on one disk you are probably wondering how difficult
it is going to be to find what you are looking for.
The answer is simplicity itself. The Nightowl CDROM File Retrieval
System will open the door for you to examine the entire library of
software contained on your CDROM. And, it will do it in style!
You will be able to choose categories of files from the main menu.
Once you have selected a category you will see a complete and convenient
listing of all the files in that category. The files will be in
alphabetical order and each file will have a description next to it that
will explain what is contained within that file.
Once you have found a file you would like to use, the Nightowl
CDROM File Retrieval System can be very helpful to you. With a single key
stroke you will be able to extract the file, read the text files inside
that file, copy the file to your hard drive, execute files inside that
file, and even show GIF picture files.
All these features, combined with an online help system available
by pressing the F1 key at any time, make the Nightowl CDROM File Retrieval
System the most flexible, powerful, yet easy-to-use package for accessing
your Nightowl CDROM.
2. Installation
The Nightowl CDROM File Retrieval System software is located in the root
directory on the CDROM itself. To take advantage of all the features offered
in the software, you will need to follow a few simple steps to complete the
installation process. The Nightowl CDROM library of files will then be at
your fingertips.
2.1 Quick Start
If you would like to preview the contents of the Nightowl CRDOM without
going through the installation process, follow these steps:
1. Place the Nightowl CDROM in your CDROM drive and make sure your computer
is at the DOS prompt.
2. Make the CDROM drive your default drive. To do this you will type the
letter that represents the CDROM drive followed by a colon (:) and then
press the <ENTER> key.
For example, if your CDROM is drive D you would type the following:
D:
and press the <ENTER> key.
This will ensure that the software will be able to find the files necessary
to show you the directories.
If the default drive is not your CDROM drive you will get an error message
telling you that a file cannot be found.
3. To start the Nightowl CDROM File Retrieval System without the installation
process, type the following:
night /noinstall
and press the <ENTER> key.
You will see a message letting you know that no installation will be done.
The message also informs you that most of the features of the software
will be unavailable to you.
You will now be able to examine any or all of the categories in the
Nightowl CDROM library.
2.2 Full Installation
To gain access to all of the features in the Nightowl CDROM File
Retrieval System you will need to perform a complete installation. This
process takes only a couple of minutes and only need be done once. The
software will save your configuration to your hard drive and will
automatically load it thereafter. Just follow these steps:
1. Place the Nightowl CDROM in your CDROM drive and make sure your computer
is at the DOS prompt.
2. Make the CDROM drive your default drive. To do this, you will type the
letter that represents the CDROM drive followed by a colon (:), and then
press the <ENTER> key.
For example, if your CDROM is drive D you would type the following:
D:
and press the <ENTER> key.
This will ensure that the software will be able to find the files necessary
to show you the directories.
3. To start the Nightowl CDROM File Retrieval System and complete the
installation process type the following:
night
and press the <ENTER> key.
You will see a message letting you know that no configuration file was
found.
4. Press the <ENTER> key to clear this message and continue.
You will then be prompted for the type of display you are using.
If your display is Color, type C and press the <ENTER> key.
If your display is either Monochrome or capable of Monochrome graphics
simulation type M and press the <ENTER> key.
Answering this question correctly is very important. An incorrect response
may cause the software to behave unpredictably on your computer system.
5. The next question asks you where you would like to have the Nightowl File
Retrieval System software installed.
Type the complete path, including the drive where you would like the
software to be installed, and press the <ENTER> key.
Pressing the <ENTER> key alone will accept the value shown.
6. The next question asks you what drive your Nightowl CDROM is located in.
Type the drive letter followed by a colon (:) and press the <ENTER> key.
Pressing the <ENTER> key alone will accept the value shown.
7. The next question asks you what external program you would like to use to
view GIF files.
Type the name that is used to execute your GIF viewer and press the
<ENTER> key.
Pressing the <ENTER> key alone will accept the value shown.
Be sure that the program you have selected for use with this
option is already installed and placed somewhere in your DOS path.
8. You will now need to indicate whether the information you have just entered
is correct.
Type Y to accept the information and continue on.
Type N to start the installation over.
Type Q to quit the installation process and return to the DOS prompt.
When you have accepted your information the night.exe file will be copied
to your chosen directory.
9. The last question asks whether you would like to copy the Nightowl DIR text
files to your hard drive.
Copying these files to your hard drive will improve the speed with which
the software can find files and display category listings on your screen.
However, they do take up approximately 1 megabyte of your hard drive
storage.
Type Y to copy the Nightowl dir text files to your hard drive.
Type N if you would like to use the Nightowl dir text files stored on the
CDROM.
If you choose not to copy the dir text files go directly to step 11.
10. You will now need to supply the directory where you would like the
Nightowl dir text files to be stored.
Type the full path, including the drive and directory where you would like
the Nightowl dir text files to be stored, and press the <ENTER> key.
The copy process takes a little time, so please be patient.
11. You will see a message informing you that installation is complete.
Press the <ENTER> key to begin your exploration of the Nightowl CDROM
library of files.
3. The Main File Categories Screen
Welcome to the Nightowl CDROM File Retrieval System.
The Main File Categories screen will be the first screen you see each
time you start up the system. At this point you can see the wide variety
of software categories offered on the Nightowl CDROM. Categories ranging
from Communications to Games; from Business to Religion; and from Music to
GIF picture files, just to name a few.
At the bottom of the screen you will see the help line which looks
like this:
F1=help =scroll <ENTER>=select <I>nstall <S>earch <D>os ESC=exit
The next section will guide you through the available
commands from the Main File Categories screen.
3.1 Main File Categories Screen Commands
After looking at the Main File Categories list you will want to get
started viewing the selections in your favorite software category.
Below is a summary of the commands available from this screen.
3.1.1 <ENTER> - Selecting a Files Category Listing
This option allows you to go directly to the File Listing screen
where you can view the individual files and their descriptions.
Use the arrow keys to select the file category you would
like to view and press the <ENTER> key.
You will now see the listing of files and descriptions that are in
the File Category you selected from the Main File Categories screen.
Use the <UP> and <DOWN> arrow keys to scroll through the listing.
The <PgUp> and <PgDn> keys will move you one page at a time through
the listing.
The <HOME> key will take you to the top of the listing.
The <END> key will take you to the bottom of the listing.
If you are on a line that begins with a file name, you can press the
<ENTER> key to open the File Manipulation window. The File Manipulation
window is described in Section 4 of this manual.
Use the <space> key to tag a file for later use in the File
Manipulation window.
Use the <+> and <-> keys to alternately tag all files or
untag all files in the current listing for later use in the File
Manipulation window.
Type S to perform a text search within the file listing itself.
You will see the familiar Text Search window. See Section 3.1.2
for a full description of the Text Search option.
Type D to execute a DOS shell. When you are finished with your
DOS commands, type EXIT to return to the Nightowl CDROM File
Retrieval System.
Type F to format a floppy disk without leaving the Nightowl
CDROM File Retrieval System.
See Section 3.1.6 for a full description of the Format Floppy command.
Holding down the <SHIFT> key and typing a letter will scroll the
File Listing to a file name that starts with that particular letter.
Press the <F1> key to look at the online help.
Press the <ESC> key to return to the Main File Categories screen.
3.1.2 S - Search For a Text String
This command opens up a window which prompts you for the text string to
search for. The search is not case sensitive.
Type the text string you want to search for and press the <ENTER> key.
As each File Category listing is searched for the text string you just
entered, a listing will be created and displayed for you on the screen.
A prompt will appear at the bottom of each screen full of lines containing
your search string. A running total of lines containing your search
string will appear right before the available commands on this line.
To continue the search you can type either N for Nonstop Search mode
or press the <ENTER> key to see the next screen of lines that match
your search string.
In Nonstop Search mode all the lines that match your search string
will be scrolled on the screen without stopping when the screen fills.
Type Q to stop the search at any prompt.
When the search is complete or you have quit the search with the Q
command you will return to the screen the search was started from.
All lines found during the Text Search will be placed in a file that can
be viewed using the U command on the Main File Categories screen.
See Section 3.1.3 for a full description of this command.
3.1.3 U - Show User-Created Directory
This command displays the listing created from the last Text Search
command from the Main File Categories screen.
See Section 3.1.2 for a full description of the Text Seazrch command.
Type U and press the <ENTER> key to display the listing.
You will now see the listing of lines containing the text string which
was used in the last Text Search command.
Use the <UP> and <DOWN> arrow keys to scroll through the listing.
Use the <PgUp> and <PgDn> keys to move one page at a time through
the listing.
The <HOME> key will take you to the top of the listing.
The <END> key will take you to the bottom of the listing.
If you are on a line that begins with a file name, you can press the
<ENTER> key to open the File Manipulation window. The File Manipulation
window is described in Section 4 of this manual.
Use the <SPACE> key to tag a file for later use in the File
Manipulation window.
Use the <+> and <-> keys to alternately tag all files or untag all
files in the current listing for later use in the File Manipulation
window.
Type S to perform a Text Search within the User Directory Listing
itself. You will see the familiar Text Search window again.
See Section 3.1.2 for a full description of the Text Search command.
Type D to execute a DOS shell.
See Section 3.1.5 for a full description of the DOS Shell command.
Type F to format a floppy disk without leaving the Nightowl
CDROM File Retrieval System.
See Section 3.1.6 for a full description of the Format Floppy command.
3.1.4 I - Install the Nightowl CDROM File Retrieval System
This command will allow you to change any of the choices you have
previously made in the Installationn processs.
Type I to begin the installation process.
See Section 2 for a full description of the Installation process.
3.1.5 D - Execute a DOS Shell
This command creates a DOS shell in which you can perform any DOS
commands you would like.
Type D and press the <ENTER> key to begin the DOS shell.
To return from the DOS shell you simply type the word EXIT at any DOS
prompt. The Nightowl CDROM File Retrieval System will reload and
you can continue from where you left the system.
3.1.6 F - Format a floppy disk
This command will allow you to prepare diskettes for use with
the Copy Files command.
See Section 4.3 for a full description of the Copy Files command.
Type F to begin the format process.
You will be prompted for the drive letter you would like to format the
disk in.
Type the letter of the drive you have selected.
Press the <ESC> key to exit the format window.
For this command to work, you must have a program with the DOS file
name of FORMAT in the path.
3.1.7 G - Go to the Unzip Directory Listing
This command allows you to return to the Unzip Directory where you have
previously left files.
Type G to display the Unzip Directory Listing.
If no files exist in the Unzip Directory you will see a message informing
you of that and will be returned to the File Manipulation window..
See section 4.2 for a full description of the commands available in the
Unzip Directory Listing screen.
3.1.8 <ESC> - Quit the Nightowl File Retrieval System
This command will allow you to leave the system and return to DOS.
Press the <ESC> key to return to DOS.
3.1.9 <F1> - Consult the Built-In Help System
This command brings up the online help system.
Press the <F1> key to look at the online help.
4. The File Manipulation Window
In this section you will learn how to gain full control over the
powerhouse features of the Nightowl CDROM File Retrieval System.
These features include extracting ZIP files, viewing the contents of
a ZIP file, reading a text file contained inside a ZIP file, showing a GIF
picture file, and copying files from your CDROM to another disk drive.
The File Manipulation window appears when you have pressed
the <ENTER> key while you are in the File Listing or User
Directory screens. The window shows the file name you have
selected and the actual directory name on the CDROM in which you
can find this file.
The commands available in this window depend on the type of
file you have chosen to manipulate. Below is a detailed description
of all of these commands.
4.1 S - Show a GIF Picture File
This command will appear only when the selected file is a GIF
picture file.
Type S to invoke the GIF viewer program you selected in the
Installation process.
You will then be placed in your chosen GIF viewing program
where you can perform any of the functions that program provides.
When you are finished with the selected image, exit the viewer.
You will be placed back in the Nightowl CDROM File Retrieval System
right where you left off. You can now select another file or perform
any of the commands listed on the screen.
4.2 X - Extract ZIP Files from the Nightowl CDROM
This command will appear only when the selected file is a ZIP
archive file.
Type X to begin extracting the contents of the selected file.
When the extraction process is complete you will see a listing of
the files which have been placed in the UNZIP directory under your
default Nightowl area.
Now that the files are unarchived to your hard drive, the following
commands become available to help you work with these extracted files.
4.2.1 R - Read a Text File
This command allows you to read the contents of a file that has been
extracted into your UNZIP directory.
Type R when you have the highlight bar over a file that contains text.
To help you along, here is a list of file extensions that may be
indicative of being a text file that can be read using this command.
DOC, TXT, 1ST, ASC, ASM and BAT.
Files with names like READ.ME and WHATS.NEW are usually likely to
be text files as well.
Use the <UP> and <DOWN> arrow keys to scroll through the listing.
Use the <PgUp> and <PgDn> keys to move a page at a time through
the listing.
Use the <HOME> key to move to the top of the listing.
Use the <END> key to move to the bottom of the listing.
When you are finished looking at the text file press the <ESC> key
to return to the UNZIP directory listing.
4.2.2 <ENTER> - Execute A Program
This command will allow you to run a program from within the Nightowl
CDROM File Retrieval System.
Press <ENTER> when the highlight bar is on a line with a file name.
The types of files that can be executed are limited to the following:
EXE, COM, BAS and BAT.
Please note that many software packages are not written in a way
that will allow them to be run in a DOS shell. If the program you
choose to execute exhibits strange behavior or causes your computer
to lock up, you will need to run that program outside of the
Nightowl CDROM File Retrieval System.
If you run a program written in a BASIC language and it does not
exit correctly you will need to type SYSTEM to return to the DOS
prompt. From that point type EXIT to return to the Nightowl CDROM
File Retrieval System.
When you return to the Nightowl CDROM File Retrieval System you will
be placed in the UNZIP file listing again and can make another
selection.
4.2.3 S - Show a GIF Picture File
This command allows you to view a GIF picture file when the highlighted
file is a GIF image.
Type S to invoke the GIF viewer program you selected in the
installation process.
You will then be placed in your chosen GIF viewing program,
where you can perform any of the functions that program provides.
When you are finished with the selected image, exit the viewer.
You will be placed back in the Nightowl CDROM File Retrieval System
right where you left off. You can now select another file or perform
any of the commands listed on the screen.
4.2.4 D - Execute a DOS Shell
This command creates a DOS shell in which you can perform any DOS
commands you would like.
Type D and press the <ENTER> key to begin the DOS shell.
To return from the DOS shell, you simply type the word EXIT at any DOS
prompt. The Nightowl CDROM File Retrieval System will reload and
you can continue from where you exited the system.
4.2.5 F - Format a Floppy Disk
See Section 3.1.6 for a full description of the Format Floppy command.
4.2.6 <F1> - Consult the Built-In Help System
This command brings up the online help system.
4.2.7 <ESC> - Quit UNZIP Directory Listing
This command exits the Unzip Directory Listing and returns you to the
File Manipulation window.
Press the <ESC> key to exit the Unzip Directory Listing.
You will then be prompted as to whether you would like to delete the
files you have unzipped.
Type Y if you would like to remove the files from the unzip directory.
Type N if you would like to leave the files in the unzip directory for
later use.
4.3 C - Copy Files From the Nightowl CDROM
This command will allow you to copy any of the files you have tagged to
your hard drive.
Type C to begin the copy process.
You will see a window appear asking you for the complete drive and path
where you would like to copy the files to.
Type the drive and path of the directory you want to store the files in
and press the <ENTER> key.
When the copying is completed you will be prompted to press a key and then
you will return to the File Manipulation window.
4.4 D - Execute a DOS Shell
This command creates a DOS shell in which you can perform any DOS
commands you would like.
Type D and press the <ENTER> key to begin the DOS shell.
To return from the DOS shell you simply type the word EXIT at any DOS
prompt. The Nightowl CDROM File Retrieval System will reload and
you can continue from where you exited the system.
4.5 F - Format a Floppy Disk
See Section 3.1.6 for a full description of the Format Floppy command.
4.6 G - Go to the Unzip Directory Listing
This command allows you to return to the Unzip Directory where you have
previously left files.
Type G to display the Unzip Directory Listing.
If no files exist in the Unzip Directory you will see a message informing
you of that and will be returned to the File Manipulation window..
See section 4.2 for a full description of the commands available in the
Unzip Directory Listing screen.
4.7 V - View a ZIP File
This command allows you to look inside of a ZIP file and read text files
without unzipping the entire archive.
Type V to obtain a View ZIP Listing of the selected file.
You will now see the View ZIP Listing from which you can select text files
to read.
Type R when the highlight bar is on any text file to begin reading that
file.
See Section 4.2.1 for a full description of the file reader.
Type D to execute a DOS shell. When you are finished with your
DOS commands, type EXIT to return to the Nightowl CDROM File
Retrieval System.
Type F to format a floppy disk without leaving the Nightowl
CDROM File Retrieval System.
See Section 3.1.6 for a full description of the Format Floppy command.
Press <F1> to Consult the Built-In Help System.
Press the <ESC> key to return to the View ZIP screen.
4.8 <F1> - Consult the Built-In Help System
This command brings up the online help system.
4.9 <ESC> - Quit the View ZIP Listing
This command allows you to return to the File Manipulation window, where
you may make another choice.
Press the <ESC> key to return to the File Manipulation window.
5. Shareware Information
There is a Special Directory on the Nightowl CDROM for shareware authors
that have allowed their programs to be added to this CDROM.
Directory 30 contains these files. The physical CDROM directory they are
stored in is 030A.
Shareware programs are not FREE programs or public domain programs. They
are copyrighted programs that the authors have released to the public for
the purpose of looking at the program and trying it out. You should then
register the program with the author if you like it and want to continue to
use it.
6. Credits and Acknowledgements
(c) Copyright 1991 All Rights Reserved
ASP Trademark of (c) Association Shareware Professioals
PKUnzip.exe Trademark of (c) PKware Inc.
VPIC Trademark of (c) Bob Montgomery
WordPerfect Trademark of (c) Word Perfect Corporation
Pascal Trademark of (c) Word Perfect Corporation
List Trademark of (c) Vernon D. Buerg
Lotus Trademark of (c) Borland Inc.
Windows Trademark of (c) Microsoft Corporation
Gap Trademark of (c) Gap Development Company
Night Trademark of (c) Night Owls
We also want to take the time to acknowledge the scores of other
trademarks and copyrights found throughout the zipped files on the Nightowl
CDROM
Again, support shareware authors by registering their programs.
And we also give special thanks to the following people:
Phil Katz
For allowing us to use his program as a part of the Nightowl CDROM.
PKZip is a very useful program.